York

“Split System” Air Conditioners

A traditional home comfort system has two parts: an indoor unit, such as a furnace or air handler, and an outdoor unit. An air conditioner is the outdoor unit that cools air and sends it to the indoor unit for circulation through your home. Indoor and outdoor units are designed to work together. When the air conditioner is properly matched with a furnace or air handler, you get maximum efficiency and longer system life. Air conditioning and cooling efficiency is measured using a Seasonal Energy Efficiency Ratio (SEER). A higher SEER means higher energy efficiency. The latest standard for SEER is 13 (beginning January 2006). Here’s what makes it cool

A “split system” central air conditioner includes a compressor, fan, condenser coil, evaporator coil and refrigerant. The system removes heat from indoor air and transfers it outside, leaving the cooled indoor air to be recirculated. A central air conditioning system uses electricity as its power source.

The basic components of an air conditioning system are:
• A Condensing Unit (the outdoor section)
• A matching indoor air handler or furnace with coil
• Ductwork to transfer the cooled air throughout the home.

Affinity 18 SEER Split System Air Conditioner (CZH)

The CZH Series condensing unit is the outdoor part of a versatile air conditioning system. It is designed to be custom matched with one of our complete line of evaporator sections, each designed to serve a specific function. Matching air handlers are available for upflow, downflow, and horizontal left or right application to provide a complete system. Electric heaters are available if required. Add-on coils are available for use with upflow, downflow, or horizontal furnaces. Field installed accessories are available as needed.

Special Benefits

• Superior Coil Protection – A stamped decorative metal coil guard completely protects coil from debris and other large damaging material while a polymer mesh further protects the coil against smaller particles.
• Color Grilles – Engineered around the needs and wants of the consumer, Affinity units are now available with a choice of color options designed to compliment any home.
• Isolated Compressor Compartment – A molded composite bulkhead isolates the compressor from the rest of the unit reducing sound and vibration.
• Protected Compressors – Each compressor is protected against abnormal pressures by an internal pressure relief valve and factory installed high and low pressure controls.
• Environmentally Friendly Refrigerant – Next generation refrigerant R-410A delivers environmentally friendly performance with zero ozone depletion.
• Durable Finish – Automotive quality finish provides the ultimate protection from harmful U.V. rays and rust creep ensuring long-lasting high quality appearance. A powder-paint topcoat is applied over a baked-on primer, using a galvanized, zinc coated steel base material. The result is a finish that has been proven in testing to provide 33% greater durability than conventional powder-coat finishes.
• Lower Installed Cost – Designed to provide enhanced installability by featuring a slide-down control compartment and angled service valves to reduce overall installation time and cost.
• Low Operating Sound Levels – A fan design boasting technology adapted from aeronautic and defense engineering provides for whisper quiet operation by allowing airflow to flow smoothly and efficiently across the fan tips.
• Filter-Drier – A factory installed, solid core liquid line filterdrier filters harmful debris and moisture from the system.
• Easy Service Access – A full end, full service, access panel with handle makes for easy entry to internal components.
• Composite Base – Strong and durable composite base pan resists rust and corrosion while it helps reduce vibrations and noise.
• Quiet drive system – The swept-wing fan, composite base pan, isolated compressor compartment, electronically controlled fan motor and two-stage compressor are engineered as a system to reduce overall sound to a mere whisper.
• Low RPM fan motor – Helps to reduce airflow noise.

*Must be installed on or after May 1st, 2009, and registered online within 90 days of installation. Otherwise, the warranty reverts to the standard warranty as published in the product warranty certificate. This warranty does not apply to R-22 or 3-phase models.

Affinity 15 SEER Split System Air Conditioner (CZE)

The CZE Series condensing unit is the outdoor part of a versatile air conditioning system. It is designed to be custom matched with one of our complete line of evaporator sections, each designed to serve a specific function. Matching air handlers are available for upflow, downflow, and horizontal left or right application to provide a complete system. Electric heaters are available if required. Add-on coils are available for use with upflow, downflow, or horizontal furnaces. Field installed accessories are available as needed.

Special Benefits

• Superior Coil Protection – A stamped decorative metal coil guard completely protects coil from debris and other large damaging material while a polymer mesh further protects the coil against smaller particles.
• Color Grilles – Engineered around the needs and wants of the consumer, Affinity units are now available with a choice of color options designed to compliment any home.
• Isolated Compressor Compartment – A molded composite bulkhead isolates the compressor from the rest of the unit reducing sound and vibration.
• Protected Compressors – Each compressor is protected against abnormal pressures by an internal pressure relief valve and factory installed high and low pressure controls.
• Environmentally Friendly Refrigerant – Next generation refrigerant R-410A delivers environmentally friendly performance with zero ozone depletion.
• Durable Finish – Automotive quality finish provides the ultimate protection from harmful U.V. rays and rust creep ensuring long-lasting high quality appearance. A powder-paint topcoat is applied over a baked-on primer, using a galvanized, zinc coated steel base material. The result is a finish that has been proven in testing to provide 33% greater durability than conventional powder-coat finishes.
• Lower Installed Cost – Designed to provide enhanced installability by featuring a slide-down control compartment and angled service valves to reduce overall installation time and cost.
• Low Operating Sound Levels – A fan design boasting technology adapted from aeronautic and defense engineering provides for whisper quiet operation by allowing airflow to flow smoothly and efficiently across the fan tips.
• Filter-Drier – A factory installed, solid core liquid line filterdrier filters harmful debris and moisture from the system.
• Easy Service Access – A full end, full service, access panel with handle makes for easy entry to internal components.
• Composite Base – Strong and durable composite base pan resists rust and corrosion while it helps reduce vibrations and noise.
• Quiet drive system – The swept-wing fan, composite base pan, isolated compressor compartment, electronically controlled fan motor and two-stage compressor are engineered as a system to reduce overall sound to a mere whisper.
• Low RPM fan motor – Helps to reduce airflow noise.

*Must be installed on or after May 1st, 2009, and registered online within 90 days of installation. Otherwise, the warranty reverts to the standard warranty as published in the product warranty certificate. This warranty does not apply to R-22 or 3-phase models.

Affinity 13 SEER Split System Air Conditioner (CZB)

The CZB Series condensing unit is the outdoor part of a versatile air conditioning system. It is designed to be custom matched with one of our complete line of evaporator sections, each designed to serve a specific function. Matching air handlers are available for upflow, downflow and horizontal left or right application to provide a complete system. Electric heaters are available if required. Add-on coils are available for use with upflow, downflow or horizontal furnaces. Field installed accessories are available as needed.

Special Benefits

• Superior Coil Protection – A stamped decorative metal coil guard completely protected coil from debris and other large damaging material while a polymer mesh further protects the coil against smaller particles.
• Isolated Compressor Compartment – A molded composite bulkhead isolated the comrpessor from the rest of the unit reducing sound and vibration.
• Protected Compressor – Each compressor is protected against high and low pressure as well as excessive temperature. This is accomplished by the simultaneous operation of high pressure relief valve and temperature sensors which protect the compressor if undesirable conditions occur. A factory installed liquid line filter drier further protects the compressor.
• Environmentally Friendly Refrigerant – Next generation refrigerant R-410a delivers environmentally friendly performance with zero ozone depletion.
• Durable Finish – Automotive quality finish provides the ultimate protection from harmful UV rays as well as rust creep ensuring long-lasting high quality appearance. A powder-paint topcoat is applied over a baked-on primer, using a galvanized, zinc coated steel base material. The result is a finish that has been proved in testing to provide 33% greater durability than conventional powder-coat finishes.
• Lower Installed Cost – Designed to provide enhance installability by featuring a slide-down control compartment allowing easy access to control components along with angled service valves to reduce overall installation time and cost.
• Low Operating Sound Levels – A fan designed boasting technology adapted from aeronautice and defense engineering provides for whisper quiet operation by allowing airflow to flow smoothly and efficiently across the fan tips.
• Filter-Drier – A factory installed, solid core liquid line filter-drier filters harmful debris and moisture from the system.
• Easy Service Access – A full end, full service, access panel with handle makes for easy entry to internal components.
• Long Lasting Operation – Strong and durable composite base pan provides added strength while resisting rust and corrosion as well reducing sound and vibration.

Affinity 13 SEER Air Conditioner, R22 (CMB)

The CMB Series condensing unit is the outdoor part of a versatile air conditioning system. It is designed to be custom matched with one of our complete line of evaporator sections, each designed to serve a specific function. Matching air handlers are available for upflow, downflow, and horizontal left or right applications to provide a complete system. Electric heaters are available if required. Add-on coils are available for use with upflow, downflow, or horizontal furnaces. Field installed accessories are available as needed.

Special Benefits

• Superior Coil Protection – A stamped decorative metal coil guard completely protects coil from debris and other large damaging material while a polymer mesh further protects the coil against smaller particles.
• Color Grilles – Engineered around the needs and wants of the consumer, Affinity units are now available with a choice of color options designed to compliment any home.
• Isolated Compressor Compartment – A molded composite bulkhead isolates the compressor from the rest of the unit reducing sound and vibration.
• Protected Compressors – Each compressor is protected against abnormal pressures by an internal pressure relief valve and factory installed high and low pressure controls. Additional protection against moisture and debris is provided by factory installed liquid line filter driers.
• Durable Finish – Automotice quality finish provides the ultimate protection from harmful U.V. rays and rust creep ensuring long-lasting high quality appearance. A powder paint topcoat is applied over a baked-on primer, using a galvanized, zinc coated steel base material. The result is a finish that has been proven in testing to provide 33% greater durability than conventional powder-coat finishes.
• Lower Installed Cost – Designed to provide enhanced installability by featuring a slide-down control compartment and angled service valves to reduce overall installation time and cost.
• Low Operating Sound Levels – A fan design boasting technology adapted from aeronautic and defense engineering provides for whisper quiet operation by allowing airflow to flow smoothly and efficiently across the fan tips.
• Filter-Drier – A factory installed, solid core liquid line filter drier filters harmful debris and moisture from the system.
• Easy Service Access – A full end, full service, access panel with handle makes for easy entry to internal components.
• Composite Base – Strong and durable composite base pan resists rust and corrosion while it helps reduce vibrations and noise.
• Quiet Drive System – Features combination of swept-wing fan, composite base pan, isolated compressor compartment and two-stage compressor to reduce overall sound to a mere whisper.
• Low RPM Fan Motor – Helps to reduce airflow noise.

13 SEER Affinity Series 3H Horizontal Discharge Air Conditioner with R-410A

The Affinity YCHD Series Condensing Unit is ideal for virtually every residential or commercial application where:

• Space is limited
• Aesthetics is a necessity
• Sound ordinances and proximity to neighbors demand ultra-quiet operation
• Corrosion resistance is required
• Peak performance season after season is ensured

This remarkably compact unit requires minimal service and airflow clearances, allowing it to be positioned as close as six inches (6″) from an obstruction. This design allows the unit to be located virtually anywhere – on the ground, roof, balcony, under a deck, or mounted to an outside wall. When two units are required, they may even be stacked on top of each other for zoned or larger cooling capacity applications.

Special Benefits

• Performance – Efficiency levels from 13.0 SEER/11.5 EER with a loose coil and up to 15.5 SEER/13.5 EER when coupled with a variable speed indoor blower. • Easy to Install – Compact “slim-line” design allows for easy installation in tight spaces. Units can be stacked.
• Quiet Operation – High efficiency scroll compressor and swept wing fan design reducing operating sound to a mere whisper.
• State Of The Art Coil Technology – Micro-channel (MC2) aluminum coil technology featured on air conditioning models provides enhanced capacities and efficiencies plus the benefit of maximum corrosion protection especially in coastal applications (up to 7 times greater corrosion resistance than conventional copper coils).
• Durable Cabinet – Heavy-gage steel cabinet and a tubular base rail provide added support.
• Aesthetic – Powder paint “Champagne” Color provides an attractive retail finish.
• Agency Listed – The Affinity Horizontal Discharge Condensing Unit is UL listed and ARI certified.
• Commercial Applications – Available in 208/230-3-60 and 460-3-60 voltages in the 2 ½, 3, 4 & 5 ton models.

Other Features:

• Factory supplied filter drier
• High pressure switch, low pressure switch
• Accumulator and crankcase heater in all sizes
• Up to 200’ line set out of the box.
• Zero lot line clearances (6” clearance in either direction)

LX Series
Model		Refrigerant/Cert
	YCJD-2
	YCJD-4
	YCJF-4

Latitude
Model		Refrigerant/Cert
	GCGD-4
	GCGD-2
	TCGD-2
	TCGD-4
	TCGD-4 (3 Phase)
	TCGF-4
	HRD
	HZD
	HRE
	HRA-3 Phase

Air Handlers

A traditional home comfort system has two parts: an outdoor unit, such as an air conditioner or heat pump, and an indoor unit.

The air handler is the indoor unit that circulates cool air through your home in the summer and warm air in the winter. The indoor and outdoor units are designed to work together.

Air handlers supply conditioned air evenly throughout your home, when used in place of a furnace, with either an air conditioning or heat pump system.

AVY – Single Piece ECM Air Handler

The deluxe Affinity fan coil line offers the ultimate in comfort, sound and application flexibility. The Affinity fan coils utilize a whisper quiet variable speed motor that provides humidity control and the lowest operating cost in the industry. The air handler is shipped ready to be installed in all positions such as upflow, downflow, horizontal left or horizontal right with some minor assembly required. No special kits are required to install this deluxe product in any position. This top of the line product was designed with the installer and homeowner in mind, easy to install and quiet, efficient and unsurpassed comfort for the end user.

All UPG air handlers and coils utilize a TXV to provide our customers with the optimum performance and refrigerant control required for 13+ systems. Air handlers can be ordered with a R22 or R410A TXV factory installed. All air handlers are also available with “Flex-coils” without a factory installed metering device. For added flexibility a R22 or R410A TXV can be field installed to meet your refrigerant choice.

Special Benefits

• Thermal Expansion Valve – Provides the ultimate refrigerant control required for today’s high efficient product. The UPG bolt-on TXV provides the added flexibility to convert the air handler to the required refrigerant. The UPG TXV is a true bolt-on which does not require brazing to replace or install.
• Insulated Cabinet – All air handler cabinets are thermally insulted with foil faced insulation to prevent sweating.
• Durable Finish Inside and Out – Air handler casings are made of pre-painted galvanized steel which provides a better paint to steel bond that resists corrosion and rust creep. All internal coil sheet metal parts are made of G90 pre-painted steel i.e. triangular plates, top plates, horizontal supports etc. Coil header plates are not painted due to the brazing process during production. The coil header plates are treated after the brazing process with a corrosion resistant spray to reduce the probability of rust.
• New 4 HK Heat Kit – Installation friendly, easy service, more robust, unique to new design.
• ECM Variable Speed Motor – Designed for efficient, quiet operation with added indoor comfort control. With the use of a humidistat, the motor will monitor the humidity in the home and automatically keep the desired humidity level in both winter and summer seasons. The ECM motor utilizes only 24% of the energy used by standard blower motors which will reduce your overall heating and cooling costs.
• ClimaTrak – Installers can set an operating cycle for the ECM motor that works best in a particular climate. Homeowners benefit from an operating cycle that maximizes their indoor comfort level regardless of whether they live in dry, temperate, or humid climate.

*Must be installed on or after May 1st, 2009, and registered online within 90 days of installation. Otherwise, the warranty reverts to the standard warranty as published in the product warranty certificate.

MV – Modular Air Handler ECM

This unique modular system allows the flexibility to handle any application. These versatile coils and blowers may be used for upflow, downflow, or horizontal left or right applications. They may be combined to function as a cooling only unit or with a heat pump including electric heat for 1 and 3 phase applications. The blower and electric heater could be used as stand alone electric furnaces.

Special Benefits

• BLOWERS – Models to match any air flow or voltage requirement. The compact size allows easy installation. Blowers are sized to deliver design air quantity both efficiently and quietly. The motors provide a selection of air quantities to match any application. All models include a one-minute blower off delay as standard to enhance system efficiency ratings. The durable, pre-painted steel protects the unit against rust and corrosion. All models have 1 inch foil face fiber glass insulation.
• COILS – Staggered rows of rifled copper tubes are mechanically expanded into enhanced surface aluminum fins to provide high heat transfer and long-lasting quality. The MC multi-position coils may be used for upflow, downflow, and horizontal left or right applications. Coil cabinets are insulated with 3/4″ foil face insulation to prevent sweating.
• ELECTRIC HEATERS – Both single and three phase electric heater models are available to match any requirement. All heaters include nickel-chromium elements with a 5-year limited warranty on 1Ø heating elements and 1 year limited warranty on 3Ø heating elements. Sequencers are provided to control heaters in all models. Circuit breakers are used in 208/230 volt, single-phase heaters of 13 KW and larger.Models equipped with circuit breakers may be altered in the field to use multi-source power supply. Over-temperature limit switches provide protection from airflow loss.
• ACCESSORIES – A full line of matching accessories available for use with the blower and coils to allow any type application.

*Must be installed on or after May 1st, 2009, and registered online within 90 days of installation. Otherwise, the warranty reverts to the standard warranty as published in the product warranty certificate.

Single Piece Air Handlers

This air handler line offers the ultimate in application flexibility. The AHX (high efficiency motor) models can only be ordered as multi-position. These multi-position model can be installed in downflow, upflow, horizontal right or left except AHX60 two piece model, which is ordered as upflow or horizontal right unit and has to be disengaged, repositioned and reassembled for horizontal left or downflow applications.

All UPG air handlers and coils utilize a field installed TXV to provide our customers with the optimum performance and refrigerant control required for 13 SEER split systems. All air handlers are available with “Flex-coils” without a factory installed metering device. For added flexibility, an R22 or R410A TXV can be field installed to meet your refrigerant choice.

Special Benefits

• Thermal Expansion Valve – Provides the ultimate refrigerant control required for today’s high efficient product. The UPG field installed bolt-on TXV provides the added flexibility to convert the air handler to the required refrigerant. The UPG TXV is a true bolt-on which does not require brazing to replace or install.
• Insulated Cabinet – All air handler cabinets are thermally insulated with 1” foil faced insulation (R-4.2) to prevent sweating. For applications in extreme humidity conditions an optional, field installed, external insulating wrap kit is also available.
• Factory Sealed – Achieves 2% or less total airflow leakage rate at duct blaster field test conditions for system airflow verification.
• Durable Finish Inside and Out – Air handler casings are made of pre-painted galvanized steel which provides a better paint to steel bond that resists corrosion and rust creep. All internal coil sheet metal parts are made of G90 galvanized.
• High Efficiency Blowers – All models use high efficiency brushless DC motors to provide cooling SEER rating enhancement.
• 4 HK Heat Kit – Installation friendly, easy service, more robust, unique to new design.
• Filters – All models have an internal filter rack provided except for the AHX60 which requires an external filter rack.

*Must be installed on or after May 1st, 2009, and registered online within 90 days of installation. Otherwise, the warranty reverts to the standard warranty as published in the product warranty certifica

AHP – Single Piece Air Handler

This new fan coil line offers the ultimate in application flexibility. The AHP (PSC motor) models can be ordered up flow only or as multi-position. The multi-position model can be installed in down flow, up flow, horizontal right or left without the need for additional field installed kits.

All UPG air handlers and coils utilize a TXV to provide our customers with the optimum performance and refrigerant control required for 13+ systems. Air handlers can be ordered with a R22 TXV factory installed that can be easily converted to R410A by changing the bolt-on TXV. Air handlers are also available with “Flex-coils” without a factory installed metering device. For added flexibility a R22 or R410A TXV can be field installed to meet your refrigerant choice.

Special Benefits

• Thermal Expansion Valve – Provides the ultimate refrigerant control required for today’s high efficient product. The UPG bolt-on TXV provides the added flexibility to convert the air handler to the required refrigerant. The UPG TXV is a true bolt-on which does not require brazing to replace or install.
• Insulated Cabinet – All air handler cabinets are thermally insulted with foil faced insulation to prevent sweating.
• Durable Finish Inside and Out – Air handler casings are made of pre-painted galvanized steel which provides a better paint to steel bond that resists corrosion and rust creep. All internal coil sheet metal parts are made of G90 pre-painted steel i.e. triangular plates, top plates, horizontal supports etc. Coil header plates are not painted due to the brazing process during production. The coil header plates are treated after the brazing process with a corrosion resistant spray to reduce the probability of rust.
• High Efficiency – 5 ton unit has high efficiency DC motor.
• New 4 HK Heat Kit – Installation friendly, easy service, more robust, unique to new design. 5 Years Limited Warranty on Single Phase Heaters, 1 Year Limited Warranty on 3 Phase Heaters.

*Must be installed on or after May 1st, 2009, and registered online within 90 days of installation. Otherwise, the warranty reverts to the standard warranty as published in the product warranty certificate.

Air Handlers (FFP / FFV )

York offers top quality, high-efficient air handlers for use in virtually any indoor application, and are available for installation in practically any authorized location. Models are available with bolt-on R22 or R410A Factory Installed Thermal Expansion Valves or as a “Flex Coil” option where TXV’s must be installed in the field when required.

Special Benefits

• Compact units fit easily into crawl spaces and attic access openings.
• Cooling-only models or heat pump models can be used for heat pump or cooling applications.
• Single piece cabinet has few panels and seams to reduce potential sweating in humid environments.
• Positive-slope drain pan produces a completely drained condensate pan after each air conditioning cycle.
• Encapsulated, not compressed, insulation gives complete R-value protection.
• Built-in filter rack offers easy access.
• Average 395 CFM per ton at 0.5 ESP.
• All models easily converted to right or left horizontal applications with a factory- or field-installed horizontal drain pan.
• Electric heaters, from 2.5 to 25 kW, are available with or without circuit breakers.

*Must be installed on or after May 1st, 2009, and registered online within 90 days of installation. Otherwise, the warranty reverts to the standard warranty as published in the product warranty certificate.

MA – Modular Air Handler

This unique modular system allows the flexibility to handle any application. These versatile coils and blowers may be used for up-flow, down-flow, or horizontal left or right applications. They may be combined to function as a cooling only unit or with a heat pump including electric heat for 1 and 3 phase applications. The blower and electric heater could be used as stand alone electric furnaces.

Special Benefits

• BLOWERS – Models to match any air flow or voltage requirement. The compact size allows easy installation. Blowers are sized to deliver design air quantity both efficiently and quietly. The direct-drive, multi-speed blower motors provide a selection of air quantities to match any application. All models include a one-minute blower off delay as standard to enhance system efficiency ratings. The durable, pre-painted steel protects the unit against rust and corrosion. All models have 1 inch foil face fiber glass insulation.
• COILS – Staggered rows of rifled copper tubes are mechanically expanded into enhanced surface aluminum fins to provide high heat transfer and long-lasting quality. The MC multi-position coils may be used for up-flow, down-flow, and horizontal left or right applications. Coil cabinets are insulated with 3/4″ foil face insulation to prevent sweating.
• ELECTRIC HEATERS – Both single and three phase electric heater models are available to match any requirement. All heaters include nickel-chromium elements with a 5-year limited warranty on 1 Ø heating elements and 1 year limited warranty on 3 Ø heating elements. Sequencers are provided to control heaters in all models. Circuit breakers are used in 208/230 volt, single phase heaters of 13 KW and larger. Models equipped with circuit breakers may be altered in the field to use multi-source power supply. Over-temperature limit switches provide protection from airflow loss.
• ACCESSORIES – A full line of matching accessories available for use with the lower and coils to allow any type application.
• LIMITATIONS – These units must be wired and installed in accordance with all national and local safety codes.

*Must be installed on or after May 1st, 2009, and registered online within 90 days of installation. Otherwise, the warranty reverts to the standard warranty as published in the product warranty certificate.

Furnaces

Most home comfort systems have two parts: an outdoor air conditioner or heat pump, and an indoor unit, a furnace. Furnaces heat and circulate warm air in the winter. They also take cool air from the outdoor unit and circulate it through your home in summer. The indoor and outdoor units are designed to work together. When the furnace is properly matched with a heat pump or air conditioner, you enjoy maximum efficiency and extended system life. Furnace heating ability is measured with an Annual Fuel Utilization Efficiency (AFUE) percentage. A higher AFUE percentage indicates a more efficient furnace.

The Affinity™ 9.C is the highest rated gas furnace in the industry (up to 98% AFUE). The EnergyGuide label outlines the energy use and efficiency of major home appliances. With its industry leading efficiency, the Affinity™ 9.C EnergyGuide rating exceeds government standards – insuring exceptional quality and low energy use.

The basic components of a furnace system are:

• A Burner, where gas (natural or propane) or oil is delivered and burned
• A Heat Exchanger, where the heat from the burning gas is transferred to the air distribution system
• Ductwork to transfer the heated air throughout the home
• A Flue or Vent Pipe, to exhaust byproducts of combustion (such as water vapor and carbon dioxide) outside

Up to 98% AFUE Modulating ECM NG33 Gas Furnace (YP9C)

These compact units employ induced combustion, reliable hot surface ignition and high heat transfer aluminized tubular heat exchangers. The units are factory shipped for installation in upflow or horizontal applications and may be converted for downflow applications.

These furnaces are designed for residential installation in a basement, closet, alcove, attic, recreation room or garage and are also ideal for commercial applications. All units are factory assembled, wired and tested to assure safe dependable and economical installation and operation.

PLEASE NOTE THAT THESE FURNACE HAVE BEEN UPGRADED TO THE -12C SERIES WITH CHANGES IN THE CONTROL BOARD AND THE GAS VALVE. THE YP9C-12C SERIES SUPERSEDES/REPLACES THE YP9C-11 SERIES MODELS AND ARE IN PRODUCTION AT THIS TIME.

Special Benefits

• Compact 33” Height and Standard Cabinet Widths
• Multi-Position Design With Minimal Conversion Requirements
• Airflow Leakage Rate of Less Than 1% of Total Airflow @ 1” ESP
• ECM Variable-Speed Motor with Large, Quiet Blower
• Fully-Supported, Slide-Out Blower Assembly for Easy Service Access
• High-Level Self-Diagnostic Controls With Fault Codes
• Sharp Edges Have Been Eliminated By Folding and Flattening the Sheet Metal
• Fully-Gasketed, Independent Access Doors With View Ports and Attractive Retail Appearance
• External Air Filters (Not Included) Provide Flexibility for IAQ Needs
• Patent-Pending Condensate Management System Eliminates the Need for External Condensate Traps

97% AFUE Modulating PSC NG33 Gas Furnace (YM9M)

These compact units employ induced combustion, reliable hot surface ignition and high heat transfer aluminized tubular heat exchangers. The units are factory shipped for installation in upflow or horizontal applications and may be converted for downflow applications.

These furnaces are designed for residential installation in a basement, closet, alcove, attic, recreation room or garage and are also ideal for commercial applications. All units are factory assembled, wired and tested to assure safe dependable and economical installation and operation.

PLEASE NOTE THAT THESE MODELS HAVE BEEN DISCONTINUED AND LAST PRODUCTION HAS TAKEN PLACE. SOME IVENTORY MAY BE AVAILABLE FOR SALE. THESE MODELS WILL BE RE-INTRODUCED IN JANUARY 2010 AS TM9M MODELS FOLLOWING A CONTROL BOARD AND GAS VALVE CHANGE.

Special Benefits

• Compact 33” Height and Standard Cabinet Widths
• Multi-Position Design With Minimal Conversion Requirements
• Airflow Leakage Rate of Less Than 1% of Total Airflow @ 1” ESP
• PSC Four-Speed Direct Drive Motor with Large, Quiet Blower
• Fully-Supported, Slide-Out Blower Assembly for Easy Service Access
• High-Level Self-Diagnostic Controls With Fault Codes
• Sharp Edges Have Been Eliminated By Folding and Flattening the Sheet Metal
• Fully-Gasketed, Independent Access Doors With View Ports and Attractive Retail Appearance
• External Air Filters (Not Included) Provide Flexibility for IAQ Needs
• Patent-Pending Condensate Management System Eliminates the Need for External Condensate Traps

80% Modulating ECM NG33 Gas Furnace (YP8C)

These compact units employ induced combustion, reliable hot surface ignition and high heat transfer aluminized tubular heat exchangers. The units are factory shipped for installation in upflow or horizontal applications and may be converted for downflow applications.

These furnaces are designed for residential installation in a basement, closet, alcove, attic, recreation room or garage and are also ideal for commercial applications. All units are factory assembled, wired and tested to assure safe dependable and economical installation and operation.

These units are Category I listed and may be common vented with another gas appliance as allowed by the National Fuel Gas Code.

PLEASE NOT THAT THE YP8C MODELS HAVE BEEN DISCONTINUED AND LAST PRODUCTION HAS TAKEN PLACE. SOME INVENTORY MAY BE AVAILABLE FOR SALE. THE YPLC MODELS HAVE BEEN UPGRADED TO THE -12C SERIES WITH CHANGES OT THE CONTROL BOARD AND GAS VAVLE AND ARE IN PRODUCTION AT THIS TIME. THE YPLC-12C SERIES SUPERSEDES/REPLACES THE YPLC-11 SERIES MODELS.

Special Benefits

• Compact 33” Height and Standard Cabinet Widths
• Multi-Position Design With Minimal Conversion Requirements
• Airflow Leakage Rate of Less Than 1% of Total Airflow @ 1” ESP
• ECM Variable-Speed Motor with Large, Quiet Blower
• Fully-Supported, Slide-Out Blower Assembly for Easy Service Access
• Tubular Aluminized Steel Primary Heat Exchanger
• High-Level Self-Diagnostic Controls With Fault Codes
• Sharp Edges Have Been Eliminated By Folding and Flattening the Sheet Metal
• Fully-Gasketed, Independent Access Doors With View Ports and Attractive Retail Appearance
• External Air Filters (Not Included) Provide Flexibility for IAQ Needs
• All Models Are Propane Convertible
• Lo-Nox Models Meet Specific Code Requirements

80% Modulating PSC NG33 Gas Furnace (YM8M)

These compact units employ induced combustion, reliable hot surface ignition and high heat transfer aluminized tubular heat exchangers. The units are factory shipped for installation in upflow or horizontal applications and may be converted for downflow applications.

These furnaces are designed for residential installation in a basement, closet, alcove, attic, recreation room or garage and are also ideal for commercial applications. All units are factory assembled, wired and tested to assure safe dependable and economical installation and operation.

These units are Category I listed and may be common vented with another gas appliance as allowed by the National Fuel Gas Code.

PLEASE NOTE THAT THESE FURNACE MODELS HAVE BEEN DISCONTINUED AND LAST PRODUCTION HAS TAKEN PLACE. SOME INVENTORY MAY BE AVAILABLE FOR SALE.

Special Benefits

• Compact 33” Height and Standard Cabinet Widths
• Multi-Position Design With Minimal Conversion Requirements
• Airflow Leakage Rate of Less Than 1% of Total Airflow @ 1” ESP
• PSC Four-Speed Direct Drive Motor with Large, Quiet Blower
• Fully-Supported, Slide-Out Blower Assembly for Easy Service Access
• Tubular Aluminized Steel Primary Heat Exchanger
• High-Level Self-Diagnostic Controls With Fault Codes
• Sharp Edges Have Been Eliminated By Folding and Flattening the Sheet Metal
• Fully-Gasketed, Independent Access Doors With View Ports and Attractive Retail Appearance
• External Air Filters (Not Included) Provide Flexibility for IAQ Needs
• All Models Are Propane Convertible
• Lo-Nox Models Meet Specific Code Requirements

LX Series
Model		Refrigerant/Cert	Efficiency	Capacity
	TM9V		96% AFUE	60 -120 MBH Input
	TM9T		96% AFUE	60 – 120 MBH
	TM9X		95.5 % AFUE	60 – 120 MBH Input
	TM8X/TMLX		80% AFUE	60 – 120 MBH Input

Latitude
Model		Refrigerant/Cert	Efficiency	Capacity
	TG9S		95.5% AFUE	40 – 130 MBH
	TG8S / TGLS		80% AFUE	40 – 130 MBH
	GY8S-E Latitude Gas Furnace		160 MBH	60 – 120 MBH Input
	YG8S (Export Only)		80% AFUE	60 – 120 MbH